New Catamaran 38 foot - The Andaman Cabriolet

39ft performance cruising catamarans designed to make the most of tropical sailing

The Andaman Cabriolet : Specification, Build Materials & Itemised Equipment / Fit-out List

Download latest updated specification in pdf format here

• Length Overall 11.90m • Beam – Maximum 6.00m • Headroom (Saloon) 1.90m • Headroom (Hulls) 2.00m • Under Wing Clearance 0.70m • Draft (boards up) 0.60m • Draft (boards down) 1.80m • Displacement 4,500 kg • Lightships 4,000 kg Materials • Where specification states ‘balsa’ = ATL © Duflex Balsa Core panels • Where specification states ‘foam’ = © DIAB H80 Divinycell high • density foam sandwich • Where specification states ‘epoxy’ = © FGI R180 Epoxy Resin or • equivalent • Where specification states ‘honeycomb’ = Polycore PVC honeycomb • laminate • Where specification states ‘plywood’ = certified marine grade • plywood Hull & deck structures • Hull (upper and lower) – foam and epoxy using biaxial & woven • fibreglass cloth • Exterior of hull & deck finish – gloss polyurethane and semi gloss • epoxy • Deck – foam with glued and glassed alloy plates for deck fittings • Under wing – balsa or glassed foam • Main structural bulkhead – balsa or foam, glassed fore and aft on hull • & deck for optimum stiffness • Forward crossbeam – carbon fibre / epoxy laminate with stainless • and aluminium fittings • Non structural furniture – combination of honeycomb, marine ply, • foam or balsa c/w epoxy & woven cloth mat • Cockpit, transom and internal shower floors – non-slip deck paint NOTE: Layup of hulls to be effected using vacuum bagging techniques as directed by DIAB, manufacturer and supplier of foam materials for the vessel’s hull and deck construction. Rig specifications (Allyacht Spars, Australia) • Mast height from base 14.40 m • I 12.40 m • P 13.10 m • E 4.70 m • J 4.00 m • Furler Profurl C350 or equivalent • Prodder Carbon fibre or alloy (I = Measurement from base of the mast to point where forestay meets mast, P = Mainsail luff, measured from boom to top of mast, E = Length of the mainsail foot, J = Front of mast to forebeam intersection) * Datum reference = deck level • Chain plates – combination carbon fibre, stainless and woven fibre • cloth / epoxy Sails (UK Halsey, Brisbane, Australia or equivalent) • Main 45 sqm fully battened (with mainsail cover and lazy jacks) • Jib 26 sqm • Spinnaker asymmetrical 80 sqm * Branding of sails will incur additional costs depending on artwork Rudder systems • Fold-back tillers x 2 with stainless crosslink arm on roller ball cars and track • Wheel steering option available (subject to price adjustment) • Raymarine ST2000 TILLER Autopilot (or equivalent) Anchoring & mooring • 6 x stainless steel or alloy cleats 150mm • Bow roller • 1 x 16KG/35lb Lewmar Delta (or equivalent) anchor with stainless • swivel • 50m x 8mm short link chain and 50m 14mm rope • Anchor bridle 3-strand rope • Lewmar V1 G 12V RC (or equivalent) anchor winch plus deck switch • & breaker Dinghy • Yachtsman 3.1m Hypalon RIB (or equivalent) with cover, seat and • with wheels fitted • 3HP outboard engine • Dinghy davits with pulley system fitted to transom Deck hardware / Stainless steel fittings • 2 x Lewmar 46ST self tailing primary winches (or equivalent) • 2 x Lewmar 40ST self tailing secondary winches (or equivalent) • All other deck hardware Lewmar (or equivalent) – clutches, blocks, • genoa cars, traveller system, diverters, deck organisers as fitted to • demonstration boat Niña • Stanchions to sides and back – stainless steel with lifelines • Swim ladder to one side – stainless steel • Cabin top handrails Trampolines • Ferrari fabric mesh (or equivalent) trampolines Ports & hatches • Cabin top complete with window screen and 4 x forward opening • Lewmar (or equivalent) hatches • 4 x Lewmar (or equivalent) hatches, 2 over singles and 2 over • double berths • 8 x Lewmar (or equivalent) side opening port lights (4 in each hull) • All other locally fabricated deck hatches fitted with hinges & latches Antifouling & painting • 2 x coats of epoxy undercoat • 2 x coats of antifouling – black • Hull paint – white + colour of choice on lower hull * Custom paintwork subject to price adjustment		Engines • 2 x 9.9 HP (or equivalent), 4-stroke long shaft outboard engines • Electric remote start • Props 3-bladed fixed • Dual engine controls fitted to helm location • Fuel – Petrol with CAV type pre-filters • Engines are located under seats in cockpit in sound proof • compartments with access through seats Electrical • 2 x 180 amp house batteries in one bank • 1 x 35AH dedicated engine start battery • All relevant wiring leading back to switch panels with PTC fuses • Inverter 1000W • 2 x 240V outlets • LED & energy saver lighting • 2 x 135W Kyocera (or equivalent) solar panels with regulators Plumbing • Pressure water system. Shurflo (or equivalent) pumps • Pressure water to galley, bathroom and deck shower • 2 x 12VDC electric big bowl TMC toilet • Black water treatment system by Saniloo™ Australia (or equivalent) • fitted to each toilet • 4 x electric bilge pumps with automatic float switches and • auto/manual switch panel + alarm Fuel & water • Fuel capacity: 100 ltr (portable fuel containers) • Fresh water capacity: 600 ltr (2 x 300 ltr in-hull epoxy tanks) Navigation • Raymarine ST60+ Wind System (or equivalent) • Raymarine ST60+ Tridata System (or equivalent) • Raymarine RW A50 - 5" CHARTPLOTTER (or equivalent) • Standard Horizon handheld VHF radio (or equivalent) • Compass Suunto 95mm (or equivalent) Safety • 2 x 2.5kg fire extinguishers • Fire blanket • 1 x gas detectors in galley • Spotlight 12V 100W • 2 x Lifebuoys (or equivalent) Accommodation • 2 x double cabins (1.95 m [6.4ft] depth • 2 x single cabins (bow) • Zip Sunbrella (or equivalent) door to each cabin • 1 x double convertible (saloon) Berths • High density foam mattresses • Cupboards • Reading lights • Hatch & side ports • Fans 12VDC (double x 2 fans, single x 1 fan) Shower / toilets 2 x shower/ toilets (aft hulls), including: • Epoxy / honeycomb moulded cupboard unit with shelves • Composite / epoxy moulded sink • 1 x wall mounted mirror • 1 x combination tap/shower unit with flexible hose • Shower bilge pump (manual) • 1 x opening side port • Lighting • 1 x zip screen door (waterproof PVC one side) – locally • manufactured, Sunbrella (or equivalent) Saloon / Cockpit • Retractable ‘soft’ roof section over saloon – locally manufactured, • stainless steel & Sunbrella (or equivalent) • Awning over cockpit – locally manufactured, Sunbrella (or • equivalent) with stainless steel fixing posts • Fitted settee in saloon to port • Table (removable to cockpit) • Insert with cushion to convert saloon seating to double berth • Aft zipped doors/screen – local manufacture, Sunbrella (or • equivalent) • 2 x iceboxes in aft beam • 2 x concealed garbage bins in aft beam • Ample cockpit seating with Sunbrella (or equivalent) covered • cushions. Saloon table relocatable to cockpit Galley • Galley to starboard of saloon with fitted cupboards and floor • 2-burner stove, SMEV (or equivalent) • Mini Grill, SMEV (or equivalent) • Stainless steel sink, SMEV (or equivalent) • Stainless steel tap • Fridge / freezer, Waeco 12vDC • ‘Lazy Susan’ carousel storage fitted under galley counter • 1 x 4.5kg LP gas bottle (located in forward wet locker servicing • galley) General • Timber fiddles fitted on various edges throughout the saloon and • hulls • Internal finish to be a combination of gloss and semi-gloss • polyurethane • Lighting – LED and/or energy saver lights • Laminate teak effect flooring in hulls and saloon CONDITIONS • All weights and measurements herein are approximate. • Specification is subject to change. • Final binding specifications will be attached to purchase agreement. • Changes to specification after contract are subject to buyer’s • approval.


More information • Design pedigree • Photos • Made for tropical waters • Specifications • Technical drawings • Accommodation • The team

Composite Catamarans Co., Ltd. 90/5 Moo 2, Chaofa Road West Vichit, Muang, Phuket 83000, Thailand Tel: +66 (0) 7626 4491 Fax: +66 (0) 7626 4454 Email: info@catamaransailingphuket.com Web: www.catamaransailingphuket.com Specifications, text, images and website design © Composite Catamarans Co., Ltd.